S21 Hyd
Bitmain Antminer S21 Hyd (335Th) mining SHA-256 algorithm with a maximum hashrate of 335Th/s for a power consumption of 5360W.
| Specifications
| Product Glance | |
| Model | S21 Hyd. |
| Algorithm | Cryptocurrency | SHA256 | BTC/BCH/BSV |
| Hashrate, TH/s(1-1) | 335 |
| Power on wall @35°C(1-2), Watt(1-1) | 5360 |
| Power efficiency on wall @35°C(1-2), J/TH(1-1) | 16.0 |
| Detailed Characteristics | ||
| Power Supply | ||
| Power supply AC Input voltage, Volt(2-1) | 380~415V AC | |
| Power supply AC Input Frequency Range, Hz | 50~60 | |
| Power supply AC Input current, Amp(2-2) | 12 | |
| Hardware Configuration | ||
| Networking connection mode | RJ45 Ethernet 10/100M | |
| Miner Size (Length*Width*Height, w/o package),mm | 339*163*207 | |
| Miner Size (Length*Width*Height, with package),mm | 570*316*430 | |
| Net weight, kg | 12.3 | |
| Gross weight, kg | 13.6 | |
| Environment Requirements | ||
| Inlet water temperature, °C | NEM(2-3)HEM1(2-3)
HEM2(2-3) |
3545
50 |
| Water flow, L/min | 8.0~10.0 | |
| Water pressure bar | ≤3.5 | |
| Working fluid(2-4) | Deionized water/Pure water | |
| Liquid PH | 8.5~9.5 | |
| Diameter of water pipe connector, mm | DN10 | |
| Storage temperature, °C | -20~70 | |
| Operation humidity(non-condensing), RH | 10~90% | |
NOTE:
(1-1) The Hashrate value, Power on wall, and Power efficiency on wall are all typical values, The actual Hashrate value fluctuates by 3%, and the actual Power on wall and Power efficiency on wall fluctuate by 5%.
(1-2) Inlet water temperature.
(2-1) Caution: Wrong input voltage may probably cause server damaged.
(2-2) Three-phase AC input, 10 A per wire.
(2-3) NEM: Normal Energy Mode; HEM: High Energy Mode.
(2-4) If the water conductivity is ≥100 μs/cm, the fluid must be replaced. The water conductivity is less than 20 μs/cm when the system is running at the first time.
